Metallurgical Mechanical Industrial Cyclone Dust Collector 450m2

114000-142500CBM/H Mechanical Cyclone Dust Collector

product description

The working principle of the cyclone dust collector is that the inner cylinder and the outer cylinder show spiral motion after the dust gas enters from the air inlet.After entering the inner cylinder, centrifugal force is generated due to the circular motion of dusty gas. Under the action of centrifugal force, the dust particles are separated from the airflow and trapped in the wall of the device. Then, the dust particles fall into the dust hopper with the help of gravity, and the purified gas is discharged upward from the inner cylinder. It is mainly used to remove the non-fibrous and non-cohesive dust with high density in the industrial waste gas, and can be used in the ventilation dust removal and material recovery system of metallurgical refractory coal chemical industry and electric power industry, especially suitable for the initial purification

Techinal parameters

Equipment advantages

▲ According to the imported design of the volute type of the cyclone dust collector, it can act as a local cyclone and reduce the load of the filter bag. The shape of the cylindrical dome has uniform force and good anti-explosion performance.
▲ The high-quality supporting high-pressure fan blows back the dust, which is not restricted by the air source conditions of the use occasion. Few wearing parts, easy maintenance, reliable operation, overcoming the shortcomings of compressed air pulse cleaning, large anti-air blow action distance, long filter bag can be used, full use of space, small footprint.
▲ The ladder-shaped flat bag is arranged in the cylinder, with a simple and compact structure and high filtration area index. Under the action of reverse air blowing, the trapezoidal flat bag has a large amplitude, and only one vibration can shake off the dust, which is beneficial to improve the life of the filter bag.
▲ Take the resistance of the dust collector as a signal or use a time controller to automatically control the rotary back-blowing to clean the ash, and automatically adjust the cleaning cycle according to the entrance concentration.
▲ The upper cover is divided into multiple pieces, which can be opened at will, changing the bag and maintaining convenient.
▲ Except for severe cold areas, this dust collector can be set up outdoors without building a dust collector room.

Pictures

Metallurgical Industrial Cyclone Dust Collector

450m2 Mechanical Dust Collector

Cyclone Mechanical Dust Collector

Metallurgical Mechanical Industrial Cyclone Dust Collector 450m2 Images